Wheelabrator Group Peening and Surface Engineering Solutions

Wheelabrator Group is the world leader in the design and manufacture of surface treatment equipment. We provide automated and manual air blast, wheel blast, wet blast and vibratory finishing equipment, to prepare, clean, peen and polish components. Additionally, we also provide an expert sub-contract service for processing your components.

Aircraft engines and structures often require blasting, shot peening and mass finishing to strengthen the material, prepare the surface for further processes like plasma spray, reduce surface profiles and increase the operating life of critical components. Through our unique understanding of the precision and repeatability required, Wheelabrator Group treatment of aerospace and aircraft parts is a critical step in the manufacturing process.

Conformance to audits and specifications such as NADCAP, SAE, MIL, AMS are closely monitored and applied during the design of Wheelabrator Group equipment. Additionally, we provide the option of simple process controls in our peening systems as an alternative to equipment with more complex controls.

AIR BLAST, WHEEL BLAST, WET BLAST AND VIBRATORY FINISHING

For aerospace applications, we provide the following equipment and sub-contract services:

Fuselage / outer skins:

  • Chemical-free selective paint stripping
  • Rib peen forming, distortion correction and saturation peening

Wings:

  • Peening stringers and spars
  • Preparing surfaces prior to bonding
  • Skin peen forming and saturation peening

Landing gear / components:

  • Chemical-free depainting
  • Surface etching and texturing
  • Shot peening for fatigue life improvement and restoration
  • Blast cleaning

Engines:

  • Chemical-free depainting
  • Removal of plasma coating
  • Surface preparation
  • Shot peening
  • Blast cleaning

SHOT PEENING FOR AIRCRAFT COMPONENTS

Shot peening is used to induce residual compressive stress in the surface of components that are prone to cyclic and repetitive loads, such as landing gears, wing spars, wing ribs, stringers, engine blades, shafts and discs. This process can also reduce stress corrosion cracking.

There are two specialised processes derived from shot peening:

Shot peen forming: the natural effect of the process compresses and extends the superficial layer of the component causing it to bow. This process is used to form skins, access panels, wing flaps, fuselage sections, etc.

Correction of distortion: uses the same technique but in reverse. When a component is distorted due to machining or heat, shot peening is used to compress and stretch the local areas to achieve the required flatness. This is used for ribs, spars and other complex structural metallic parts.

WHEELABRATOR GROUP TECHNOLOGIES

Our technologies, coupled with our global experience, allow the Wheelabrator Group to service a wide range of requirements. Regardless of the size of the part to be processed or your productivity requirements, we will design and construct the appropriate surface engineering solution for your needs. Among other processes, our technologies are used to remove scale, paint, flashing, grease and burrs as well as peen, etch, polish, deburr and profile parts.

Besides aerospace applications, Wheelabrator Group technologies have been used for:

  • Autosport: shot peening stub axles
  • Automotive: cleaning / peening engines and engine components
  • Railway: cleaning railway carriages
  • Diecasting: deflashing parts
  • Manufacturing: rust and scale removal from structural steel
  • Medical: peening medical implants
  • Optical: cleaning and polishing spectacle frames
  • Mining: peening mining drill bits
  • Speciality Metals: imparting surface profiles

Equipment and sub-contract services are regularly provided to most of the key Aerospace OEMs such as Airbus, Boeing, Bombardier, BF Goodrich, General Electric, Messier and Pratt & Whitney.

We hold various aerospace accreditations and supplier approvals.

Our internationally renowned products and services include Abrasive Developments, Clean-Tek, Impact Finishers, Schlick, Sisson Lehmann, Vacu-Blast, Walther Trowal and Wheelabrator.

Make an enquiry

Press Release

XAIC China Buys Wing Peening Machine from Wheelabrator Group

The Wheelabrator Group has successfully delivered and commissioned a wing-peening system for the XAIC aircraft-manufacturing company, located in X'ian, China. The new MP 20,000 machine will be mainly used for peen forming and saturation strengthening of wing-skin panels of large-sized civil airpl

White Papers

DISA and Wheelabrator Together Lowering Your Cost Per Part

Norican Group is the parent company of DISA (moulding technology), Wheelabrator (surface preparation technology) and Wheelabrator Plus (surface preparation aftermarket services).

Address
Wheelabrator Group Ltd.

41 Craven Rd

Altrincham

WA14 5HJ

United Kingdom

+44 (0) 161 928 6388 +44 (0) 161 929 0381 www.wheelabratorgroup.com Shot Peening Subcontract Solutions Aerospace at Wheelabrator Group

Wheelabrator Group Images

Products and Services

Video

Related Projects



Bombardier Aerospace Q400 Dash 8



The Q400 Dash 8 airliner was developed by Bombardier to meet the requirements of regional airlines for larger aircraft on high-density, short-haul routes.

6 August 2020

Bombardier Q300 DHC-8 Dash 8



The Dash 8 Q300 regional airliner was introduced in 1998 by Bombardier Aerospace De Havilland based in Downsville Ontario.

22 May 2020

Cessna SkyCourier 408 Turboprop Aircraft



Cessna SkyCourier 408 is a new twin-engine, high-wing, large-utility turboprop being developed by Textron Aviation for FedEx Express.

8 January 2018

Airbus A350 XWB



Airbus announced the A350 aircraft, a longer-range and lighter derivative of the A330 aircraft, in 2004.

10 August 2016

Gulfstream G500 Business Jet



The G500 is a high-speed business jet designed and manufactured by Gulfstream Aerospace Corporation.

10 April 2016

Airbus H175 Helicopter



The H175 is a super-medium-lift, twin-engine helicopter introduced by Airbus Helicopters. It is designed to meet the demanding requirements of the oil and gas industry, search and rescue (SAR) and emergency medical services.

3 August 2015

ARJ21 Regional Jet Aircraft, China



The ARJ21 regional jet is being developed by the AVIC I Commercial Aircraft Company (ACAC), based in Shanghai.

1 May 2013

AgustaWestland AW109 Power Light Multirole Helicopter



The AW109 Power light multirole helicopter was developed by AgustaWestland in Italy. The AW109 was built in civil and military versions.

15 January 2013

Boeing 777 Long-Range Wide Body Airliner



The Boeing Commercial Airplanes Group introduced the Boeing 777 family of aircraft in 1989. The aircraft fills the size gap between the Boeing 767 and Boeing 747.

20 June 2012

AgustaWestland Grand



AgustaWestland of Italy has developed a new light twin-turbine helicopter, the Grand, which was unveiled at the Farnboro

5 January 2007

Airbus A380-800F Wide-Bodied Freighter



Airbus, already well established in the freighter market, has now moved to the upper end of the cargo market with the launch of the A380-800F freighter.

25 November 2004

Airbus A380 Superjumbo Airliner



Airbus's newly designed superjumbo, the A380, is the world's first twin-deck, twin-aisle airliner. Advantages of the A380 include lower fuel burn per seat and lower operating costs.

31 August 2004

Airbus A310-200F



The Airbus A310-200F freighter aircraft is a conversion of the A310 wide-bodied airliner by the EADS company, Elbe Flugz

23 August 2004

Bombardier Global 5000



The Bombardier Global 5000 is a super large business jet which, with a range of 8,889km (4,800nm), is capable of flying

12 November 2003

Boeing 737 Next-Generation (NG) Narrow Body Airliner



The Boeing 737 twin-engine airliner is the bestselling jetliner of all time.

14 September 2003

AgustaWestland AW119 Koala



The AW119 Koala single-turbine light helicopter, developed and manufactured by AgustaWestland of Italy, first flew in 1995 and entered service in 2000.

20 August 2003

Bombardier Learjet 31A



Over 2,300 Learjets have been built and are in operation as corporate jets worldwide. The rear engine Learjet business j

13 May 2003

Bombardier CRJ200



The 50-seat Canadair Regional Jet 200 series was announced by Bombardier in 1995 and introduced into service in 1996. Th

19 September 2002

Hawker Beechcraft Hawker 800XP



The launch of the Raytheon Hawker 800XP extended performance mid-size business jet was announced in 1995. The aircraft i

11 August 2002

Hawker Beechcraft Hawker 400XP



The Raytheon Beechjet 400A light business jet first flew in 1990. The aircraft was renamed the Hawker 400XP (extra paylo

7 August 2002

Boeing 767



The Boeing 767 is a wide-bodied twin-aisle, twin-engine airliner. The aircraft is the most widely used aircraft on cross

3 July 2002

Airbus A340-600



The Airbus A340-600 is the largest of the Airbus jetliners and is a super-stretched version of the A340 family of aircraft.

Bell Agusta BA609



The BA609 tiltrotor aircraft is being developed by Bell Agusta Aerospace Company, a joint venture of Bell Helicopter Tex

2 July 2002

AgustaWestland AW139



The AW139 (formerly known as the AB139) is a medium twin-turbine helicopter, which was developed by Bell Agusta Aerospace, a joint venture of Bell Helicopter Textron of the US and AgustaWestland.

Hawker Beechcraft Premier 1



The Premier 1 light business jet is the first all-new business jet built by Raytheon Aircraft from an original design an

Bombardier Challenger 604



The Challenger 604 intercontinental business jet, a major upgrade of the 601 design, was introduced in 1996. Over 800 Ch

9 May 2002

Bombardier Challenger 300



The Challenger 300, originally known as the Continental Business Jet BD-100, is medium size trans-continental business j

28 April 2002

AgustaWestland AW101 Medium-Lift



The AW101 medium-lift helicopter is manufactured by AgustaWestland International (formerly EH Industries), a joint ventu

7 April 2002

Bombardier Canadair 415 Superscooper



The Bombardier Canadair 415 amphibious aircraft was launched in 1991. The aircraft first flew in 1993. 65 aircraft have

2 April 2002

Hawker Beechcraft Hawker 4000



The Hawker 4000 super mid-size business jet is the largest aircraft in the Hawker family and features all-composite fuse

21 February 2002

Airbus A318



The Airbus A318 single-aisle medium range-airliner is a short bodied version of the A319. The A318 received European Joint Aviation Authorities (JAA) certification in May 2003.

14 November 2001

Airbus A340-200 and A340-300



The Airbus A340 family of wide-bodied four engine airliners is optimised for long range to ultra long range performance

BAE Avro RJ



The Avro RJ transport jet and the Avro Business Jet variant were developed from the BAE 146 short to medium-range region

Airbus A330 Wide-Bodied Medium / Long-Range Twin-Engine Airliner, Europe



The A330 is the original wide-bodied medium and long-range twin-engine airliner of the Airbus A330 / 340 family of aircraft.

BAE 146



The BAE 146 short to medium-range regional airliner is flown by operators worldwide.

BAE Avro RJX



The Avro RJX was the latest development of the successful Avro RJ and BAE 146 family of aircraft. The RJX development ha

Airbus A320



The Airbus A320 single-aisle medium-range airliner first entered service in 1988 and more than 5,000 aircraft of the A320 family are in service today, with more than 8,600 ordered.

Bombardier Learjet 45



The Bombadier Aerospace Learjet 45 nine-seat super-light business jet was announced in 1992. The 300th aircraft was deli

Bombardier Global Express



The Global Express is the ultra long-range business jet developed by Bombardier Aerospace. The aircraft has a cruise sp

Airbus A310



255 Airbus A310-300 twin-engine wide-bodied airliners have been built since 1983. The A310 is in service worldwide with

13 November 2001

Airbus A300-600



The Airbus Industrie A300-600 is a large-capacity, wide-bodied medium- and long-range airliner. The aircraft is an advan

12 November 2001

Airbus A300-600ST Beluga



Airbus developed the Beluga as a successor to the Super Guppy, initially for Airbus' own manufacturing needs. Currently,

Bombardier CRJ700 Jet



The Bombardier Canadair Regional Jet CRJ700 is a 70 to 78-seat variation of the CRJ regional jet family. The CRJ was introduced into service in 1992.

10 July 2001

Boeing 747-400 Intercontinental Airliner



Boeing had designed the 747 in the 1960s for the US Air Force's large jet cargo transport programme. Boeing decided to pursue the commercial aviation market with their 'jumbo' 747.

20 November 2000

Press Release

8 July 2013

Wheelabrator Impact Finishers celebrated being the first shot peening subcontract supplier in the UK to win the supply chains for the 21st century (SC21) bronze award at the SC21 Task Force Conference at the Williams F1 conference centre in Oxfordshire.

Read more
18 June 2013

A new video from Wheelabrator presents the team and the operations of the Wheelabrator Technology Centre, Metelen, in Germany.

Read more
28 May 2013

Wheelabrator engineers have developed a new Robot Peener to deliver three times faster process time with complete process reliability.

Read more
6 March 2013

Wheelabrator Plus is pleased to have continued its important certification AS / EN 9100 aerospace quality management system accreditation to perform sub contract finishing of customer parts at its Birmingham site.

Read more
21 January 2013

Wheelabrator has extended its successful Module8 concept for a new generation of wet blast machines.

Read more
25 October 2009

Wheelabrator is delighted to add another important certification to its portfolio by recently gaining the prestigious AS /EN 9100 aerospace Quality Management System accreditation to perform sub contract finishing of customer parts at its Birmingham site. Not only has it achieved this high-status

Read more
25 October 2009

High pressure and extreme temperatures are definitely something that materials sent into space need to cope with. The fuel tanks for the European carrier rocket “Ariane” are an important component of the aerospace project and have high complexity and extraordinary safety requirements.

Read more
25 October 2009

Peen forming by blasting with steel shot is now carried out by Dassault Aviation at their Seclin site (northern France) to correct the distortion of mechanical parts after their shapes have become altered during the manufacturing process, or to complete the shape of the Falcon 7x wing panels afte

Read more
25 October 2009

Under the Ministry of Defence, specifically the Air Force, Atelier Industriel de l‘Aéronautique (AIA) based in Bordeaux, France is responsible for the industrial maintenance and overhaul of the Aeronefs engines. AIA had to renew their shot blasting machines as most of their equip

Read more
25 October 2009

Wheelabrator continues to provide innovative peening solutions to Skills Inc., in its Auburn, Washington facility. With a September 2008 installation of a Wheelabrator Inline Peening machine; this is the company’s second Wheelabrator installation in 3 years. Skills Inc., a supplier to major aircr

Read more
25 October 2009

The Wheelabrator Technology Centre in Charleville-Mézières, France, designs, develops and manufactures a wide range of a multi-axis shot peening equipment. In addition to their renowned MP range (CNC machines), the MPR (robotised shot peening machine) range offers optimal solutions for various sh

Read more
25 October 2009

Wheelabrator Group has successfully delivered and commissioned a MPD 15000 CNC peen forming machine to Beijing Aeronautical Manufacturing Technology Research Institute (BAMTRI) in August 2008. This equipment was mainly used for the peen forming and shot peening of large aircraft compone

Read more
3 January 2008

Leading manufacturer GKN Aerospace Transparency Systems is flying through the cleaning process at its UK site in Birmingham. Thanks to Wheelabrator Group, it has seen a 66 per cent reduction in the time taken to remove oxides from tooling parts at its factory in Kings Norton, UK. GKN Aerospace pu

Read more
3 January 2008

Shot peening is a cold working process used to enhance the fatigue resistance of highly stressed metallic components such as compressor blades, aircraft structural parts and transmission systems. Any metallic component that is subjected to cyclic stresses within its elastic limit can benefit from

Read more
3 January 2008

A quality blast result is key to customer satisfaction, but it is not the only deciding factor for aerospace companies when making equipment purchasing decisions. Efficiency and cost are also high on the priority list. The double-frame technology blast machine from Wheelabrator Group offers you f

Read more
3 January 2008

Impact Finishers, the sub-contract division of Wheelabrator Group has passed an in-depth examination to receive the aerospace industry’s acclaimed NADCAP accreditation. The distinction applies to Impact Finishers sub-contract shot peening facilities in the UK at Slough and Coventry. La

Read more
3 January 2008

The Wheelabrator Group Technology Centre in Charleville, France, specialises in the development and manufacturing of shot-peening machines and 'airblast precision equipment' dedicated to the aerospace industry. The range, principally CNC machines and robotic systems, offers a set of successful an

Read more
3 January 2008

In 2002 MTU Maintenance bought surface preparation equipment from Wheelabrator Group for their new plant in Zhuhai China. The package included one shot blast machine, one shot peening machine, two wet blasting/peening machines and four hand blasting cabinets. Three years later MTU came

Read more
3 January 2008

Stressed out aerospace companies can take to the skies after Wheelabrator Group announced it had signed an exclusive deal with high-tech French peening specialists Sonats, bringing a new range of machines to Asia. Sonats' innovative technology is similar to traditional shotpeening processes, usin

Read more
7 June 2007

The Wheelabrator Group has successfully delivered and commissioned a wing-peening system for the XAIC aircraft-manufacturing company, located in X'ian, China. The new MP 20,000 machine will be mainly used for peen forming and saturation strengthening of wing-skin panels of large-sized civil airpl

Read more
9 August 2005

The Wheelabrator Group has successfully delivered and commissioned a wing-peening system for the XAIC aircraft-manufacturing company, located in X'ian, China. The new MP 20,000 machine will be mainly used for peen forming and saturation strengthening of wing-skin panels of large-sized civil airpl

Read more

Regional Offices

United Kingdom - Wheelabrator Group Ltd.

41 Craven Road

Altrincham

WA14 5HJ

Other

United Kingdom

+44 (0) 161 928 6388 +44 (0) 161 929 0381
China - Wheelabrator Group, Ltd.

Unit No. 1103, 11/F Futura Plaza 111-13

How Ming Street KwunTong

Kowloon

Hong Kong

China

+852 28 271 927 +852 28 776 839
WG Plus de Mexico, S de RL de CV (Wheelabrator)

Rectángulos No. 214 Parque Industrial Arco Vial

C.P. 66000 Garcia N.L.

Mexico

+52(81)1946-1000 +52 81 8385 5734
Spain - Wheelabrator Group S.L.U.

Gran Via de les Corts Catalanes 133 - At B.

ES-08014 Barcelona

Spain

+34 93 421 12 66 +34 93 422 31 37
USA - Wheelabrator Group

1606 Executive Drive

LaGrange

GA 30240

United States of America

+1 706 884 6884 800 544 4144 (toll free) +1 706 884 9918
Canada - Wheelabrator Group

Burlington Technology Center

1219 Corporate Drive

Burlington

L7L 5V5

Ontario

Canada

+1 905 319 7930 800-845-8508 (toll free) +1 905 319 7561
Germany - Wheelabrator Group GmbH

Heinrich-Schlick-Strasse 2

D 48629 Metelen

Germany

+49 2556 88-0 +49 2556 88 150
Hong Kong - Wheelabrator Group Ltd.

Unit 03, 11th Floor., Futura Plaza

111-113 How Ming Street

Kwun Tong, Kowloon, Hong Kong SAR

Other

Hungary

+852 2827 1927 +852 2877 6839
Russia - Wheelabrator Group Holding Ltd

Ul. Malakhitovaya, 27, Building B

129128 Моscow

Russia

+7 499 181 55 48 +7 499 181 55 71
Poland - Wheelabrator Schlick Sp. z o.o.

Biuro Handlowe, ul. Rzymowskiego 30 lok. 318

PL-02-697 Warsaw

Poland

+48 22 651 70 91 +48 22 651 70 92
Wheelabrator Group Ltd.

41 Craven Rd

Altrincham

WA14 5HJ

United Kingdom

+44 (0) 161 928 6388 +44 (0) 161 929 0381 www.wheelabratorgroup.com Shot Peening Subcontract Solutions Aerospace at Wheelabrator Group
DISA India Ltd

5th Floor, Kushal Garden Arcade

1A Peenya Industrial Area

Peenya 2nd Phase, Bangalore 560058

India

+91 80 4020 1400 +91 80 4020 1400-1404 (Regional Contacts) +91 80 2839 1661
France - Wheelabrator Group (Technology Centre)

24, rue Camille Didier BP 39

F-08001 Charleville-Mézières Cédex

France

+33 (0) 324 33 63 21 +33 (0) 324 37 39 37
France - Wheelabrator Group

28-29 rue de Tournenfils

F-91540 Mennecy

France

+33 164 57 21 21 +33 164 57 05 59
Germany - Wheelabrator Group GmbH

Ferdinand-Porsche Str. 23

D- 51149 Köln

Other

Germany

+49(0) 2203 297 51 0 +49(0) 2203 297 51 60
Czech Republic & Slovakia

Za Balonkou 269

CZ-260 01 Príbram 1

Czech Republic

+420 318 479 111 +420 318 479 333
Belgium - CellMark Belgium (DISA and Wheelabrator Agent)

Verlorenbroodstraat 63B

BE-9820 Merelbeke

Belgium

+32 92 187 180 +32 92 33 0831
Close
Close
Close